Revo DMA 2 PC
Last updated
Last updated
Disable Virtualization Features (if not needed):
For AMD CPUs: Disable SVM (Secure Virtual Machine) and IOMMU in the BIOS.
For Intel CPUs: Disable VT-d and Intel Volume Manager in the BIOS.
Disable Quick Start & Safe Start in BIOS.
Disable NX-Bit / XD-bit (if available) in CPU settings.
Enable CSM (Compatibility Support Module) in BIOS if needed.
Set PCI Slot to Gen1 (Advanced > PCI Settings) for better compatibility.
2. Install Required Software
Visual C++ Redistributable Runtimes:
Download and install the all-in-one package from .
This ensures all necessary runtime libraries are installed.
Windows Defender Control:
Download DControl from .
Run the tool to disable Windows Defender.
3. Adjust Graphics Settings for Escape from Tarkov
Locate the Graphics.ini File:
Navigate to C:\Users\UserName\AppData\Roaming\Battlestate Games\Escape from Tarkov\Settings\Graphics.ini.
Adjust the resolution settings to match your monitor's native resolution to avoid issues with ESP or other visual elements.
Save the file after making changes.
4. Windows Settings
Disable Core Isolation:
Go to Windows Security > Device Security > Core Isolation.
Turn off Memory Integrity.
Power Settings:
Set your power plan to High Performance in Control Panel > Power Options.
5. DMA Memory Mapper (MMAP)
Download REVO DMA Memory Mapper:
Run the REVO MMap Tool on main PC to generate mmap file.
Then move mmap file to where REVO is running from on 2nd PC.
You can delete the REVO MMap Tool afterwards.
6. Test DMA Card Speed
Download REVO DMA Test Tool:
Run the tool with Option 3 to test the speed of your DMA card.
Ensure that the throughput and read/write speeds are optimal. 5K+ RPS = Good.
If speeds are lower than expected, check your hardware connections and BIOS settings.
Confirm you are using a quality high speed cable.
Download the tool from .
Download REVO Tools and run REVO DMA Test Tool. Get from