# Setting up your godlike Fuser

### Resolution check

<div><figure><img src="/files/fP3oNecRTqx67ptwoP6f" alt=""><figcaption></figcaption></figure> <figure><img src="/files/gfjKCqvOMtBLwQBylVFa" alt=""><figcaption></figcaption></figure></div>

**Before doing anything with the fuser. Ensure that the two systems you intend on using with the fuser are set to the same resolution and refresh rate.**

## Hardware Install

<figure><img src="/files/mBWlqvhyrgwepMy3Z7zG" alt=""><figcaption></figcaption></figure>

1. **Connect the Fuser to the&#x20;**<mark style="color:yellow;">**yellow**</mark>**&#x20;power port using the provided power cable.**
2. **Attach your primary display, which you'll use throughout your experience, to the&#x20;**<mark style="color:red;">**red**</mark>**-labeled display port.**
3. **Connect an HDMI cable from your main PC (via either the GPU or motherboard) to the&#x20;**<mark style="color:blue;">**blue**</mark>**-labeled HDMI port.**
4. **Connect another HDMI cable from your second PC (via either the GPU or motherboard) to the&#x20;**<mark style="color:purple;">**purple**</mark>**-labeled HDMI port.**
5. **Turn on the Fuser by pressing the power button on the front (not labeled in the image).**

## Settings Page

<figure><img src="/files/WjXQG0lxr0VbeSrg1NiQ" alt=""><figcaption></figcaption></figure>

<mark style="color:blue;">**Blue**</mark>**: Enable or disable fusion**

<mark style="color:purple;">**Purple**</mark>**: Mode selector**

<mark style="color:red;">**Red**</mark>**: Switch between displays when not actively fused**

<mark style="color:yellow;">**Yellow**</mark>**: Adjust the intensity of the overlaying display**

**White: Work in Progress, refer to our discord.**

## Resolutions Page

<figure><img src="/files/9bQW0kuKZfnZffw1FDVj" alt=""><figcaption></figcaption></figure>

**Select your desired resolution and refresh rate from this page.**

## Conclusion

<figure><img src="/files/akVHPKlssbKNcv00Gp2l" alt=""><figcaption></figcaption></figure>

**Active display fusion is confirmed when all four lights on the front panel are illuminated. This completes the instructions for the 4K Fuser. If you have any questions or encounter any issues, please feel free to reach out to us** [**here**](https://discord.com/invite/midnightcheese)**.**

## Troubleshooting

**Issue: All four lights on the front of the Fuser are solid, but the monitor displays a black screen.**

**Steps to Resolve:**

1. **In both Windows display settings and your GPU’s application settings, set both displays to 1920×1080 resolution at 60Hz.**
2. **Restart both PCs by performing a full power cycle.**
3. **Disconnect your main monitor, then plug it back in.**
4. **Reconnect the Fuser properly, ensuring all three cables are securely in their correct ports.**
5. **Make sure the Fuser is powered on, then press the EDID button.**
6. **Wait approximately 30 seconds, then press the 1K60 option.**
7. **If the main display remains black, repeat step #3.**
8. **If your display is functioning correctly, gradually increase the refresh rate and resolution until you reach your desired settings.**


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.midnight-market.ca/midnight-market-knowledge-base/dma-setup/setting-up-your-godlike-fuser.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.