# No display before / after flashing Fuser / other things

1. Use K1 key to cycle between the display resolutions, give it a few seconds after each press.
2. If you are still not getting any display, disconnect the fuser and set your monitor display to 1920x1080
3. Re-attach the fuser and cycle through to the factory setting 1920x1080
4. You should now have video, we recommend you reflash your device after this step.

Make sure both screens are set to the same resolutions/HZ and scale layout

<figure><img src="/files/3jFuJ0wOXrkyayozqyEP" alt="" width="375"><figcaption></figcaption></figure>

<figure><img src="/files/Q3WzMMFRgRLZYMHXWqiD" alt="" width="375"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.midnight-market.ca/midnight-market-knowledge-base/dma-setup/button-fuser-setup/fuser-information/fuser-key-functions/flashing-fuser/no-display-before-after-flashing-fuser-other-things.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.